key features: ? 1w output power ? tight line/load regulation ? miniature sip case ? 1,000 vdc isolation ? >2 mhour mtbf ? 20 standard models ? industry standard pin-out d100r tightly regulated miniature, 1w sip dc/dc con vert ers series input parameter conditions min. typ. max. units input voltage range 5 vdc input 4.5 5.0 5.5 vdc 12 vdc input 10.8 12.0 13.2 24 vdc input 21.6 24.0 26.4 48 vdc input 44.0 48.0 52.0 input filter internal capacitor reverse polarity input current 0.3 a output parameter conditions min. typ. max. units output voltage accuracy 2.0 % line regulation for vin min to max 0.5 % load regulation (note 1) 0.5 % ripple & noise (20 mhz) (note 2) 50 75 mv p - p output power protection 120 % temperature coef? cient 0.01 0.02 %/oc output short circuit momentary (0.5 sec.) general parameter conditions min. typ. max. units isolation voltage 60 seconds 1,000 vdc isolation resistance 500 vdc 1,000 m isolation capacitance 100 khz, 1v 60 pf switching frequency 60 khz environmental parameter conditions min. typ. max. units operating temperature range ambient -40 +25 +85 oc operating temperature range case -40 +100 oc storage temperature range -40 +125 oc cooling free air convection humidity rh, non-condensing 95 % physical case size 0.76 x 0.28 x 0.39 inches (19.5 x 7.2 x 10.0 mm) case material non-conductive black plastic (ul94-v0) weight 0.07 oz (2.1g) reliability speci? cations parameter conditions min. typ. max. units mtbf mil hdbk 217f, 25oc, gnd benign 2.0 mhours absolute maximum ratings parameter conditions min. typ. max. units input voltage surge (1 sec) 5 vdc input -0.7 9.0 vdc 12 vdc input -0.7 18.0 24 vdc input -0.7 30.0 48 vdc input -0.7 55.0 lead temperature 1.5 mm from case for 10 sec 260 oc internal power dissipation all models 450 mw caution: exceeding absolute maximum ratings may damage the module. these are not continuous operating ratings. electrical speci? cations speci? cations typical @ +25c, nominal input voltage & rated output current, unless otherwise noted. speci? cations subject to change without notice. micropower direct 292 page street suite d stoughton, ma 02072 usa t: (781) 344-8226 f: (781) 344-8481 e: sales@micropowerdirect.com w: www.micropowerdirect.com rohs compliant
notes: 1. output load regulation is specified for a load change of 20% to 100%. 2. when measuring output ripple, it is recommended that an external ceramic capacitor (approx 10 f) be placed from the +vout pin to the -vout pin. 3. the 5v, 12v and 24v input units do not require external components to operate, but the use of an input capacitor (10 f) may enhance performance in some applications. an output capacitor (1.0 f to 10 f) may be used to reduce ripple. the 48v input models require an input capacitor of 4.7 f to 47 f (dependent upon the application). 4. it is recommended that a fuse be used on the input of a power supply for protection. see the table above for the correct rating. derating curve g notes: ? all dimensions are typical in inches (mm) ? tolerance x.xx = 0.01 (0.25) ? pin 1 is marked by a dot or indentation on the side of the unit model selection guide mechanical dimensions pin connections (f max) 220 capacitive load model number input output ef? ciency (%, typ) fuse rating slow-blow (ma) voltage (vdc) current (ma) voltage (vdc) current (ma, max) current (ma, min) nominal range full-load no-load D101R 5 4.5 - 5.5 322 28 3.3 200.0 20.0 62 500 d102r 5 4.5 - 5.5 298 28 5.0 200.0 20.0 67 500 d103r 5 4.5 - 5.5 298 26 9.0 111.0 11.0 67 500 d104r 5 4.5 - 5.5 285 26 12.0 83.0 9.0 70 500 d105r 5 4.5 - 5.5 285 38 15.0 66.0 7.0 70 500 d111r 12 10.8 - 13.2 136 16 3.3 200.0 20.0 61 200 d112r 12 10.8 - 13.2 128 16 5.0 200.0 20.0 65 200 d113r 12 10.8 - 13.2 124 16 9.0 111.0 11.0 67 200 d114r 12 10.8 - 13.2 119 16 12.0 83.0 9.0 70 200 d115r 12 10.8 - 13.2 119 16 15.0 66.0 7.0 70 200 d121r 24 21.6 - 26.4 66 9 3.3 200.0 20.0 63 100 d122r 24 21.6 - 26.4 61 9 5.0 200.0 20.0 68 100 d123r 24 21.6 - 26.4 65 9 9.0 111.0 11.0 68 100 d124r 24 21.6 - 26.4 59 9 12.0 83.0 9.0 70 100 d125r 24 21.6 - 26.4 59 9 15.0 66.0 7.0 70 100 d131r 48 44.0 - 52.0 33 7 3.3 200.0 20.0 63 100 d132r 48 44.0 - 52.0 32 7 5.0 200.0 20.0 65 100 d133r 48 44.0 - 52.0 32 7 9.0 111.0 11.0 67 100 d134r 48 44.0 - 52.0 30 7 12.0 83.0 9.0 70 100 d135r 48 44.0 - 52.0 30 7 15.0 66.0 7.0 70 100 pin function 1+vin 2-vin 4 -vout 6 +vout micropower direct www.micropowerdirect.com 292 page street ste d stoughton, ma 02072 ? tel: (781) 344-8226 ? fax: (781) 344-8481 ? e-mail: sales@micropowerdirect.com
|
